2gig TS1 - Touch Screen Wireless Keypad Uživatelský manuál stáhnout pdf (Strana 3)

LEARNING/PAIRING THE KEYPAD WITH THE

CONTROL PANEL

1 MakesurethattheControlPanelhaspowerusingthesuppliedAC

adapterandconfirmthattheadapterisconnected.

WARNING: AControlPanelwithoutthe900MHzTransceiver

installedcannotcommunicatewiththe2GIG‐TS1.

2 Makesurethatthe2GIG‐TS1haspowerfromthesuppliedAC

transformer.ConnecttheACadaptertothe2GIG‐TS1.Confirmthat

thewiresareconnectedusingthecorrectpolarity.

3 Asthe2GIG‐TS1powersup,thefollowingmessageisvisibleonthe

display.

4 FromtheControlPanel’sInstallerToolbox,selectSystem

Configuration.

5 SelecttheGoTobutton.

6 Togotoquestion4,enter04.

7 SelecttheRFKeypadnumbertoassigntothe2GIG‐TS1.Usethe→

arrowtoselecttheRFKeypadnum ber(1‐4).AfterselectingtheRF

Keypadnumber,pressthe↓arrowtostartconﬁguringthespeciﬁc

parametersfortheRFKeypad.

8 Pressthe→arroworpressthenumber1onthekeypadtogglethe

sengontheﬁrstquesonto“used”.Pressthe↓arrowtoconnue

configuringoptions.

9 SettheRFKeypadEquipmentCodeto1059bypressingthe→arrow

until“(1059)2GIG‐TS1wirelesstouchscreenkeypad”appears.Press

the↓arrowtoadvancetothenextopon.

10 Learnthe2GIG‐TS1intotheControlPanel.Aerpressingthe↓

arrowinthepreviousstep,theLearnbuttonappears.

INITIATING THE PAIRING PROCESS

InitiatethepairingprocessattheControlPanelbypressingtheLearn

button.

1 2 3 4 5

Žádné komentáře

2gig TS1 - Touch Screen Wireless Keypad Uživatelský manuál Strana 3